Swiss Catamaran Concept 55 for sale
€ 1,833,333
Previous price: € 2,470,000
VAT excl.
Reduced
Details
Boat ID
s255916
Boat type
Boat category
sailing catamaran
Model
Swiss Catamaran Concept 55
Boat builder
Technical data
Length
16.95 m (56 feet)
Beam
8.32 m (27.3 feet)
Draught
1.20 m (3.9 feet)
No. of toilets
2
engine
engine 1
Model
Yanmar
Power
80 hp (59 kW)
Engine type
inboarder
Fuel
diesel
engine 2
Model
Yanmar
Power
80 hp (59 kW)
Engine type
inboarder
Fuel
diesel
Equipment
air conditioning, battery charger, generator, solar plant
gangway
freezer, oven, refrigerator
genoa, mainsail, storm jib
Description
CAP MED BOAT & YACHT CONSULTING is pleased to present for sale this magnificent Swiss Cat 55 catamaran, a new semi-custom model designed by French naval architect François PERUS of Yacht Design Collective and built by Italian manufacturer Top Marine Costruzione. A fast blue-water cruising boat.
Main features:
Daggerboards for better upwind ability, less wetted surface and greater safety.
Two steering wheels for better visibility under sail and for maneuvering in tight spaces.
Luxurious, warm wood interior with balsa core.
Only three female molds were used for the entire hull, deck and roof.
After thorough finite element analysis, the hull lamination consists of an E-glass skin, a SAN-based Gurit Corecell M foam core, epoxy resin, post-cure, including primary bulkheads in laminated carbon fiber prior to demolding. Carbon fiber is used in high-load areas, including longitudinal spars, spars and bows, daggerboard junctions and front crossmembers.
Contact: Anthony CEGRI on 07 81 62 18 65 - 0033 781 621 865
Main features:
Daggerboards for better upwind ability, less wetted surface and greater safety.
Two steering wheels for better visibility under sail and for maneuvering in tight spaces.
Luxurious, warm wood interior with balsa core.
Only three female molds were used for the entire hull, deck and roof.
After thorough finite element analysis, the hull lamination consists of an E-glass skin, a SAN-based Gurit Corecell M foam core, epoxy resin, post-cure, including primary bulkheads in laminated carbon fiber prior to demolding. Carbon fiber is used in high-load areas, including longitudinal spars, spars and bows, daggerboard junctions and front crossmembers.
Contact: Anthony CEGRI on 07 81 62 18 65 - 0033 781 621 865
Your email has been sent.
€ 1,833,333
Previous price: € 2,470,000
VAT excl.
Your email has been sent.
Supplier
132 Avenue Maurice Chevalier
06150 Cannes
France
06150 Cannes
France