Swiss Catamaran Concept 55 na sprzedaż
€ 1 833 333
Poprzednia cena: € 2 470 000
bez VAT
Niższa cena
1 / 39
Szczegóły
Nr ID łodzi
s255916
Rodzaj łodzi
Kategoria łodzi
katamaran żaglowy
Model
Swiss Catamaran Concept 55
Producent łodzi
Dane techniczne
Długość
16,95 m (56 stóp)
Szerokość
8,32 m (27,3 stóp)
Zanurzenie
1,20 m (3,9 stóp)
Ilość WC
2
silnik
silnik 1
Model
Yanmar
Moc
80 KM (59 kW)
Typ silnika
silnik zabudowany
Paliwo
diesel
silnik 2
Model
Yanmar
Moc
80 KM (59 kW)
Typ silnika
silnik zabudowany
Paliwo
diesel
Wyposażenie
generator, klimatyzacja, kolektor słoneczny, ładowarka do akumulatora
trap
lodówka, piekarnik, zamrażarka
fok sztormowy, genua, grot
Opis
CAP MED BOAT & YACHT CONSULTING is pleased to present for sale this magnificent Swiss Cat 55 catamaran, a new semi-custom model designed by French naval architect François PERUS of Yacht Design Collective and built by Italian manufacturer Top Marine Costruzione. A fast blue-water cruising boat.
Main features:
Daggerboards for better upwind ability, less wetted surface and greater safety.
Two steering wheels for better visibility under sail and for maneuvering in tight spaces.
Luxurious, warm wood interior with balsa core.
Only three female molds were used for the entire hull, deck and roof.
After thorough finite element analysis, the hull lamination consists of an E-glass skin, a SAN-based Gurit Corecell M foam core, epoxy resin, post-cure, including primary bulkheads in laminated carbon fiber prior to demolding. Carbon fiber is used in high-load areas, including longitudinal spars, spars and bows, daggerboard junctions and front crossmembers.
Contact: Anthony CEGRI on 07 81 62 18 65 - 0033 781 621 865
Main features:
Daggerboards for better upwind ability, less wetted surface and greater safety.
Two steering wheels for better visibility under sail and for maneuvering in tight spaces.
Luxurious, warm wood interior with balsa core.
Only three female molds were used for the entire hull, deck and roof.
After thorough finite element analysis, the hull lamination consists of an E-glass skin, a SAN-based Gurit Corecell M foam core, epoxy resin, post-cure, including primary bulkheads in laminated carbon fiber prior to demolding. Carbon fiber is used in high-load areas, including longitudinal spars, spars and bows, daggerboard junctions and front crossmembers.
Contact: Anthony CEGRI on 07 81 62 18 65 - 0033 781 621 865
Twoja wiadomość została wysłana.
€ 1 833 333
Poprzednia cena: € 2 470 000
bez VAT
Twoja wiadomość została wysłana.
Oferent
132 Avenue Maurice Chevalier
06150 Cannes
Francja
06150 Cannes
Francja
