Dick Zaal 41 Centre Cockpit for sale
€ 39,900
1 / 41
Details
Boat ID
s311476
Boat type
Boat category
sloop
Model
Dick Zaal 41 Centre Cockpit
Boat builder
Dick Zaal
Boat name
Zeewolff
Technical data
Length
12.50 m (41 feet)
Beam
3.90 m (12.8 feet)
Draught
1.70 m (5.6 feet)
Hull material
wood
Hull colour
white
No. of showers
1
No. of toilets
2
Material
plastic
Fuel tank
250 ltr
Material
plastic
engine
Propulsion
shaft drive
Cooling
two circuits
Propeller
variable pitch propeller
Model
Mitsubishi Midif S4S
Power
84.5 hp (62 kW)
Engine type
inboarder
Fuel
diesel
Engine hours
ca. 543
Number of cylinders
4
Sails
Masts
one-masted ship
Equipment
anchor, electric anchor windlass, battery (5 batteries), battery charger, generator (Whispergen; capacity: 6 kW), hour meter, inverter (capacity: 2000 W), position lights, shore supply 220V, warm water system
bathing ladder, bathing platform, suncushion, teak deck
cockpit table, heating (Hot-air heating, Stove heating), electric hob, microwave, refrigerator
CD, radio, television
bimini top, camper canvas, cockpit cover, sprayhood
electric winches, roller-furling jib, mainsail, roller-furling genoa
Fenders and mooring lines, Deck covers, Electrical system voltages: 12 V, 24 V, 220 V, Self-draining cockpit, Guardrails and pushpit/pulpit, Deck colour: Blue
Description
Very nice and solidly built departure ship. also suitable for long stay on board.
This rock-solidly built cruising yacht is being sold because the owner has, unfortunately, passed away. As an experienced shipbuilder, he built this yacht for himself and equipped it very well with every conceivable piece of equipment, including electric winches, two spacious sleeping cabins with private bathrooms, a safe central cockpit, and a beautifully finished interior.
The boat is constructed using a very sturdy wood-epoxy system, consisting of a layer of aramid (Kevlar), cedar wood, fiberglass epoxy, a Hempel vapor barrier, and finished with epoxy containing copper to prevent fouling. Thanks to this highly rigid construction method, you won’t have to worry about condensation; the wood-epoxy construction also provides excellent insulation, making extended stays on board entirely possible.
The shipbuilder began construction in 2004, and the boat was finally launched in 2014. He has taken many trips on it, so the boat has proven its reliability. The draft and clearance height are not yet known exactly. It is presumed to be 1.60 m.
This beautiful, ready-to-sail yacht is being sold at a reasonable price because there are still a few finishing touches to be completed, such as finishing the forward wet room, and the seams between the teak deck will also need to be partially re-caulked. There is no risk of leaks, as the teak deck is glued to an epoxy-coated deck. Additionally, a number of scepter posts are loose, the baseboards will need to be replaced, and both the winter cover and the cockpit awning must be checked for loose stitching. The scepter sockets are laminated into a mahogany beam, which also serves to support the deck. On the starboard side, part of this beam appears to be damaged by woodworm. This section will be replaced. On the port side forward, there is a crack in the laminate; this needs to be milled out and filled.
So if you’re looking for a well-built, light yet sturdy cruiser—built with great care—or a comfortable place to live that still needs some work, all at a very reasonable price, I’d love to invite you to come take a look.
Please visit our website for all the details: www.scheepsmakelaardijgoliath.nl or contact the yacht broker at +31(0)621993488
General
Steering system: Very solid steering with rods and worm gear
Windows: STAINLESS STEEL
Accommodation
Saloons: Forward cabin with double bed, 2 bunk beds of 1.90m, wet cell with shower/toilet, saloon bed L-couch, 2 armchairs, chart table, galley. SB passage to aft cabin, BB wet cell and passage to aft cabin. In the aft cabin is a spacious double bed, with sink and closet space.
Television: Built in cabinet
Engine, electrics, water
Propulsion: Water-lubricated propeller shaft
Water tank & material: 2 x 120 liters + 1 x 120 liters (reserve)
Rig and sails
Genoa: Furlex furling genoa
Jib: Furlex furling jib
Furling foresail: Yankee
Equipment
Boat cover: Winter coat; the stitching and zipper need to be checked
Safety
Gas bottle locker with drain: No gas on board
This rock-solidly built cruising yacht is being sold because the owner has, unfortunately, passed away. As an experienced shipbuilder, he built this yacht for himself and equipped it very well with every conceivable piece of equipment, including electric winches, two spacious sleeping cabins with private bathrooms, a safe central cockpit, and a beautifully finished interior.
The boat is constructed using a very sturdy wood-epoxy system, consisting of a layer of aramid (Kevlar), cedar wood, fiberglass epoxy, a Hempel vapor barrier, and finished with epoxy containing copper to prevent fouling. Thanks to this highly rigid construction method, you won’t have to worry about condensation; the wood-epoxy construction also provides excellent insulation, making extended stays on board entirely possible.
The shipbuilder began construction in 2004, and the boat was finally launched in 2014. He has taken many trips on it, so the boat has proven its reliability. The draft and clearance height are not yet known exactly. It is presumed to be 1.60 m.
This beautiful, ready-to-sail yacht is being sold at a reasonable price because there are still a few finishing touches to be completed, such as finishing the forward wet room, and the seams between the teak deck will also need to be partially re-caulked. There is no risk of leaks, as the teak deck is glued to an epoxy-coated deck. Additionally, a number of scepter posts are loose, the baseboards will need to be replaced, and both the winter cover and the cockpit awning must be checked for loose stitching. The scepter sockets are laminated into a mahogany beam, which also serves to support the deck. On the starboard side, part of this beam appears to be damaged by woodworm. This section will be replaced. On the port side forward, there is a crack in the laminate; this needs to be milled out and filled.
So if you’re looking for a well-built, light yet sturdy cruiser—built with great care—or a comfortable place to live that still needs some work, all at a very reasonable price, I’d love to invite you to come take a look.
Please visit our website for all the details: www.scheepsmakelaardijgoliath.nl or contact the yacht broker at +31(0)621993488
General
Steering system: Very solid steering with rods and worm gear
Windows: STAINLESS STEEL
Accommodation
Saloons: Forward cabin with double bed, 2 bunk beds of 1.90m, wet cell with shower/toilet, saloon bed L-couch, 2 armchairs, chart table, galley. SB passage to aft cabin, BB wet cell and passage to aft cabin. In the aft cabin is a spacious double bed, with sink and closet space.
Television: Built in cabinet
Engine, electrics, water
Propulsion: Water-lubricated propeller shaft
Water tank & material: 2 x 120 liters + 1 x 120 liters (reserve)
Rig and sails
Genoa: Furlex furling genoa
Jib: Furlex furling jib
Furling foresail: Yankee
Equipment
Boat cover: Winter coat; the stitching and zipper need to be checked
Safety
Gas bottle locker with drain: No gas on board
Your email has been sent.
€ 39,900
Your email has been sent.
Supplier
Hendrik Bulthuisweg 2
8606 JN Sneek
Netherlands
8606 JN Sneek
Netherlands
