Italia 16.98 na sprzedaż

IY 16.98
BOAT LIST PRICE WITHOUT EQUIPMENT, TO BE CONFIGURED
VAT
Leasing options

INTERIORS
All interiors and bulkheads are made of marine plywood of various thicknesses and veneered in teak in horizontal vein with satin hand finish. The floor is made of teak veneered marine plywood, while the entrance steps, door frames and some details are in teak lamellar. Foam rubber cushions and mattresses with differentiated density and fabric upholstery at the choice of the owner. Every detail of interior construction uses the high know-how of the builder.
It is available in the Bellissima version a coating in oak, leather and mirror with horizontal slats backlit on the side walls of dinettes and cabins.
Internal layouts Possible arrangements:
- Standard 1: 3 cabins / 2 bathrooms (optional sailor's cabin)
- Standard 2: 3 cabins / 3 bathrooms (optional sailor's cabin)
- Optional 4 CAB: 4 cabins / 3 bathrooms

The spacious dinette is equipped with a table (140 x 85 cm) that can accommodate 8 people. The correspondence is placed differently depending on the versions but is still equipped with a large table and space for the installation of all the on-board instrumentation. Even the kitchen is placed differently according to the versions but in both cases the linear development is almost 4 m. There is a 3-burner tilting kitchen with oven and stainless steel tientibene to protect. The kitchen top is in corian or similar and the double tub stainless steel sink is integrated on the top. At the bow of the master cabin is the calavele with independent access from the osteriggio on deck. As an option, this room can be set up to accommodate a sailor.

DECK EQUIPMENT
On the deckhouse, 2 rails are installed for the staple scalds according to the lengths and positions provided for by the deck plan. The rails are inclusive of the relative jib trolleys and demultips for the control of the scotta points. 12 stoppers and their deck organizers are installed as required by the deck plan. All the sketches necessary for the completion of the deck equipment (references to the tree foot for halyards and terzaroli sockets, sketches and references for gennaker scotte, sketches and references for gennaker wall pullers, referrals for staple and exits from the foot of the tree) are sized in accordance with the provisions of the deck plan. All pulpits and candlesticks are made of mirror-polished stainless steel, according to the standards of the shipyard. Side gates are installed on both walls. The drapes are made of 1 x 19 spiroidal cable.
Opening transom The transom can be opened to allow access to the sea and the placement of the bathing ladder, the opening is operated by a suitable piston system. The inside of the opening portion is covered in teak.