Colin Archer 10.50 for sale
€ 7,950
1 / 41
Details
Boat ID
s312474
Boat type
Boat category
sailing yacht
Model
Colin Archer 10.50
Boat builder
Boat name
Stormvogel
Technical data
Length
10.50 m (34 feet)
Beam
3.50 m (11.5 feet)
Draught
1.80 m (5.9 feet)
Clearance
12 m (39 feet)
Max. headroom
1.90 m (6.2 feet)
Hull material
wood
engine
Propulsion
shaft drive
Cooling
two circuits
Model
Mitsubishi S4S
Power
112.7 hp (83 kW)
Engine type
inboarder
Fuel
diesel
Number of cylinders
4
Equipment
manual bilge pump, position lights, underwater paint
gas hob, oven
jib, mainsail
Electrical system voltages: 12 V, Reversing clutch: Present, Mizzen sail
Description
It is a 2/3-scale replica of the famous Colin Archer RS1. Pine on oak frames. The deck is made of fiberglass and epoxy. Two-masted, gaff-rigged.
It is a 2/3-scale replica of the famous Colin Archer RS1.
A heavily built ship made of pine (4 cm) on oak frames, with frames spaced 50 cm apart, and the deck is covered with fiberglass and epoxy.
Two-masted gaff-rigged vessel.
Mitsubishi S4S Turbo engine.
Engine fully overhauled and reinstalled, including:
New turbocharger on the engine
New exhaust system
New cooling system
Propeller shaft realigned
New propeller shaft bearings and shaft seal (grease-lubricated).
Heavy-duty automatic bilge pump
Old wheelhouse removed
Solid wood interior
Foot pump for fresh water and foot pump for salt water Hand pump for drainage Three-burner gas stove and gas oven Rotten deck planks replaced Fiberglass on deck repaired Metal railing derusted and painted New steering mechanism New navigation lights New zsolar panels Victron charge controller Battery and shore power controller
200-liter water tank (bag) with carbon filter House battery New rudder made of solid oak New benches in the cockpit All planks below and above the waterline re-caulked Antifouling in October 2023 New anodes
It is a 2/3-scale replica of the famous Colin Archer RS1.
A heavily built ship made of pine (4 cm) on oak frames, with frames spaced 50 cm apart, and the deck is covered with fiberglass and epoxy.
Two-masted gaff-rigged vessel.
Mitsubishi S4S Turbo engine.
Engine fully overhauled and reinstalled, including:
New turbocharger on the engine
New exhaust system
New cooling system
Propeller shaft realigned
New propeller shaft bearings and shaft seal (grease-lubricated).
Heavy-duty automatic bilge pump
Old wheelhouse removed
Solid wood interior
Foot pump for fresh water and foot pump for salt water Hand pump for drainage Three-burner gas stove and gas oven Rotten deck planks replaced Fiberglass on deck repaired Metal railing derusted and painted New steering mechanism New navigation lights New zsolar panels Victron charge controller Battery and shore power controller
200-liter water tank (bag) with carbon filter House battery New rudder made of solid oak New benches in the cockpit All planks below and above the waterline re-caulked Antifouling in October 2023 New anodes
Your email has been sent.
€ 7,950
Your email has been sent.
Supplier
Hendrik Bulthuisweg 2
8606 JN Sneek
Netherlands
8606 JN Sneek
Netherlands
