Archi Edson Chock 38 for sale

2021 SCOTTO SHIPYARD, MARSEILLE, FRANCE
- Localised refit of the hull underside with A4 stainless steel screws, 6 mm - Repair of the mast around the spreader bases and jumper stay fittings.
- Reinforcement of the spreader base fittings.
- Replacement of the mast partners.
- New mast gasket collar and set of wedges.
- Repair of the deck beam/shelf at the mast.
- Installation of 3 new oak knees on the port side.
- Repair of 3 solid oak frames.
- Painting of the entire hull with AWL CRAFT 2000 F5050.
2016 LOBRICHON & INFINITY SHIPYARDS, LE BORGNE, MORBIHAN, FRANCE
- Refurbishment of approximately 1.5 m of wooden keel and lower frames at the mast step.
- New mast step.
- New engine mounts and propeller shaft.
- Engine box with insulation.
- Installation of a new Nanni N2.10 inboard diesel engine and a gearbox.
2009 - 2010 IN SIDNEY, BRITISH COLUMBIA, CANADA
- Reframing of the boat in white oak.
- Original planking in fluted mahogany with West Coast red cedar coated in epoxy.
- New deck in West Coast red cedar, covered with biaxial fabric and epoxy.
- Hull faired and painted with a two-part polyurethane product from Ditsler.
- The owners recorded 2,600 hours of work devoted to this process.
- This figure is considered reasonable given the scale of the project and the finish details achieved.