3D Tender Pilot 420 for sale
1 / 13
Details
Technical data
Length
4.20 m (13.8 feet)
Beam
2.30 m (7.5 feet)
Description
This text has been translated automatically.
OPPORTUNITY 3D TENDER PILOT 420 NEW
Grey aluminium hull
Two towing masts directly connected to the boat’s structure
Steering console
Pilot seat with storage locker
Non-slip, self-bailing EVA deck
20 cm PU fender protection
Two rear access platforms
Self-bailing deck
2 storage lockers at the bow
2 steps to the front platform
Working platform at the bow of the boat
Double access hatch
Towing ring at the stem
4 cleats
Mooring bailer
The PILOT 420 is a port tender from the 3D Tender brand, designed by our architect Samy Boubezari. The PILOT 420 specialises in assisting the manoeuvring of boats of all sizes in port. Its compact lines and shallow draught allow it to manoeuvre in the most difficult-to-access areas. It features a rounded “marotte” bow, which enables it to act as a pushing boat. Its flat bottom, good beam-to-length ratio and hull design give it excellent stability and manoeuvrability at sea.
The boat is extremely robust, with its H5083 aluminium hull 5 mm thick and a dense internal structure 3 mm thick. Its 20 cm PU reinforcement running all around the hull provides maximum protection in case of contact, without marking boats. The structural plans have been validated by the classification society Bureau Veritas.
Grey aluminium hull
Two towing masts directly connected to the boat’s structure
Steering console
Pilot seat with storage locker
Non-slip, self-bailing EVA deck
20 cm PU fender protection
Two rear access platforms
Self-bailing deck
2 storage lockers at the bow
2 steps to the front platform
Working platform at the bow of the boat
Double access hatch
Towing ring at the stem
4 cleats
Mooring bailer
The PILOT 420 is a port tender from the 3D Tender brand, designed by our architect Samy Boubezari. The PILOT 420 specialises in assisting the manoeuvring of boats of all sizes in port. Its compact lines and shallow draught allow it to manoeuvre in the most difficult-to-access areas. It features a rounded “marotte” bow, which enables it to act as a pushing boat. Its flat bottom, good beam-to-length ratio and hull design give it excellent stability and manoeuvrability at sea.
The boat is extremely robust, with its H5083 aluminium hull 5 mm thick and a dense internal structure 3 mm thick. Its 20 cm PU reinforcement running all around the hull provides maximum protection in case of contact, without marking boats. The structural plans have been validated by the classification society Bureau Veritas.
Your email has been sent.
Your email has been sent.
Supplier
79 Av. des Frères Roustan
06220 Vallauris
France
06220 Vallauris
France
