International Dragon for sale on special offer

  • Great Britain, South Devon

  • sailboat

  • 2 weeks ago

  • Visits: 298

Model: International Dragon | Manufacturer: Custom built/Eigenbau | Category: old-timer
Remarks :
The International Dragon, first designed in 1929, does not need an introduction.
WANDERER is a wonderful example and has had a very interesting and colourful life, starting in Denmark under the name of CRAZY VI, and then shipped to Hong Kong in the 1970’s, and renamed WANDERER. She raced successfully in and around Hong Kong, and benefitted from her Borresen pedigree, known for building quick and stiff boats. She was re-imported to the UK in 2007 and has since been epoxy sheathed with clear epoxy to minimize maintenance and weight and to maximize stiffness and performance, whilst retaining the stunning varnished appearance.
She has a very successful racing history and has taken part in Cowes Classic Week in the last few years in her current ownership, and with excellent results.
Original spruce mast and decent sail wardrobe will enable WANDERER to continue to be a race winner in the right hands, or a truly lovely cruising yacht if preferred. Lightly used twin axle top notch bespoke road trailer included. VAT understood to have been paid but not evidenced.

Accommodation :

Inventory :
General equipment:

Twin axle road trailer with sail storage box
2 x winches
Folding anchor
Chain/warp
4 x Fenders
4 x mooring warps
Boathook
Fairleads fore and aft
Overall cover
Cockpit cover
1 x manual bilge pump

Mechanical :
Construction and rigging:

Designed by Johann Anker and built by Borresen of Denmark in 1967.
HIN # DN240 and initially known as CRAZY VI before being shipped to Hong Kong in the 1970’s and renamed WANDERER with sail # HKG6
Carvel planked in mahogany on steamed Oak frames, and with copper fastenings.
Integral long keel
Keel hung rudder
Oak floors
Epoxy and glass matt sheathing over the hull
Decks overlaid with Teak planking
Spinnaker hatch forward with sliding cover
Mahogany cuddy
Tiller steering
Rigging:
Bermudan fractional sloop rig with a keel stepped wooden varnished mast.
Varnished boom
Roller furling headsail
Stainless steel standing rigging
Wooden spinnaker pole
Spinnaker chute under deck
Sails:
North Mainsail (2017) used 3 times
Dacron jib
3 x spinnakers
  • Length:
    8.84m (29 feet)
  • Beam:
    1.83m (6 feet)
  • Keel type:
    long keel

manual bilge pump

fenders

spinnaker

£ 19,500

VAT not paid
+44 18XX-XXXX (show)
Supplier:

Band of Boats

  • Great Britain, Dartmouth

Contact form

Similar boats

Atlas 1100
Reduced
sloop ≈ 9×3.80m
Atlas 1100 (1985)
France
€ 40,000 44,000 VAT paid
ONE OFF Design Sailing Vessel 30 FT
sloop ≈ 8.53×2.74m
ONE OFF Design Sailing Vessel 30 FT (2002)
Spain
€ 24,000 VAT paid
Classic Kliever 11
sloop ≈ 8.84×2.74m
Classic Kliever 11 (1980)
Great Britain
£ 7,500 VAT paid
Custom built FM 30
sailing trimaran ≈ 9.14×7.70m
Custom built FM 30 (2006)
Italy
€ 25,000 VAT paid
Koster K 32
sailboat ≈ 8.75×2.65m
Koster K 32 (1962)
Denmark
kr. 120,000 VAT not paid
Custom built Lutra 30
sloop ≈ 9.14×2.91m
Custom built Lutra 30 (2006)
Great Britain
£ 29,950 VAT paid
Tamarisk 24
Reduced
sloop ≈ 9.14×2.44m
Tamarisk 24 (1981)
Great Britain
£ 4,000 5,000 VAT paid
Custom built ENEZ 30
sloop ≈ 8.95×2.99m
Custom built ENEZ 30 (2018)
France
€ 42,000 VAT paid
Custom built Dragon
Reduced
sloop ≈ 8.89×1.97m
Custom built Dragon (1990)
France
€ 7,000 9,500 VAT paid
22 SQM TORE HOLM Skerry Cruiser - International
sailboat ≈ 9.80×1.80m
22 SQM TORE HOLM Skerry Cruiser - International (1928)
Germany
€ 45,000 VAT not paid
Custom built Lynæs 28
sailboat ≈ 8.13×3.10m
Custom built Lynæs 28 (1973)
Denmark
kr. 120,000 VAT not paid
TORE Herlin Kustenkreuzer
Reduced
sailboat ≈ 7.96×2.30m
TORE Herlin Kustenkreuzer (1958)
France
€ 45,000 49,900 VAT paid