Modus Marine Lelystad(2020): keel plug springing and fitting, saildrive bare, sanding, 7x primer, gray coating, mast foot solidifying, Puttings and stringers sanding, coating, laminating, reinforcement under putting bulkhead, extra UD weave, Skin grommets fitting, Rudder: fitting, filling, sanding and finishing.(Sep 2019) repair rudder blade: adjust and improve. Quality Yachtpainting Lelystad(Nov.2019) sanding entire yacht, degreasing 545, anti-corrosion epoxy treatment awlgrip. Entire yacht sprayed off, 3 coats awlcraft oyster white, Piping gelcoat removed hull to laminate, 2x putty with awl grip awlfair. piping sprayed with Awlcraft SE Enchanted Blue Metallic, Antifouling interspeed 340, Rope holes cockpit. Underwater hull: keel sanded bare, laminated, putty, shell panels laminated front to back, underwater hull treated. Winch reinforcements installed, 2x additional winch foundation for winches aft.<br />
<br />
(2021); waterlock, div grommets, ball valves and bronze skin penetrations. Electrics are not yet connected. There are two engines present in loose parts (Volvo Penta MD2002) that may be supplied.<br />
<br />
New toilet hoses(2022) not yet used and valves.<br />
<br />
(28-Oct-2021) B&G Triton 2 SDW + Display, 3 color anchor light AS34, Exhaust mirror grommet 45mm, (9-Nov-2021)stainless steel deck cap fule 38mm and water 38mm, hose transparent/ stainless steel spiral 38mm, Hella naviled trio BSH 3 colors, (9-Oct-2021)VHF antenna with cable through mast, (9-Dec-2022) 20m coaxial cable serving antenna Tremoflex 50 ohm 10.2mm (9-Nov-2022) Aquasignal deck and steam light, Top light,<br />
<br />
Rigging NED 1671, (halyards) new September 2022:Mainsail halyard; Albatros Dyneema SK78, 10mm, FC Blue, Dyneema cover 7-10mm, Wichard Trap Closure 8mm - 27m, Genuaval; Same as mainsail halyard, FC Yellow, Wichard D Closure 8mm - 25m, Spinnaker halyard; Idem as mainsail halyard, FC White, Wichard Snapshackle L90 - 28m, Code-0 halyard; idem 8mm, Black - 38m, Aft Service Halyard 8mm white/gray, Loop shackle 6mm - 27m, Cutter halyard - FC red - 18m.<br />
<br />
New mast, boom and rigging; Selden mast (Aug. 2019) aluminum, , backstay 5mm, forestay 5mm, V1 2 pcs 6mm, V2 D3 2 pcs 6mm, D1 2 pcs 6mm, D2 pcs 4mm. Equipped with hardware tbv mainsail halyard, Crane line, Spinnaker halyard, Code-0 halyard (2:3) @11.080mm, genoa halyard, Stag sail/cutter halyard, spi-pole lies, lazy jacks inside, 2 spreaders with end stops,1 spinnaker boom eye @1450mm, euver inlet serving MD3 carts and sliders, Downhaul hardware serving Rodkick 10, 3 core cable to masthead and 2 core cable serving steam light. Selden Boom, Section B135, 3,300mm, 2 single-line reefs and 1x binding reef, outhoul 1:3 delayed, backstay, V-Cam Antal Single Clutch, Selden PBB50 Triple Becket cam, Selden PBB50 triple , Dyneema Flyer HMPE 10mm red gray 12m.<br />
<br />
Modus Marine Lelystad (2022) Reinforce puttings, Modify want puttings, Mast foot solidify, Sand puttings and stringers, coat, laminate, reinforcement under putting bulkhead, additional UD fabric.(2024)new teak beam serving mainsail rail