Custom built Foiler 50 for sale on special offer

  • Sint Maarten, Caribbean

  • sailing trimaran

  • 6 months ago

  • Visits: 268

Model: Custom built Foiler 50 | Manufacturer: Custom built/Eigenbau | Category: used boat
There will probably never be another occasion like this: This fast trimaran was designed by Sylvestre Langevin and constructed by Dufour Alu in 1983.Just two of these models have been built and both of them are well known for their great success in many offshore regattas. Within the Multi 50, it is the only boat with wings that is made of aluminum and can be disassembled! It is certainly also one of the "Golden Oldies Multihulls" that races the most. Many times, she has participated in a transatlantic race and many times she was awarded. In her latest Regatta was a Route du Rhum, where she came third.
Super fast and unique - she is waiting to continue her regatta career.
Contact us for more detail informationAdditional Information
General

Constructor : Dufour Alu (17 , France)
Architect : Sylvestre LANGEVIN
Launched: 1983
Material hull, deck, beam: aluminum (AG3 and AG4)
Foils in cast aluminum accessible through hatches
Hull color: white
Bridge color: sand
Flag: French

Dimensions
Length: 15.15 m (50')
Width: 12 m + foils = 13 m
Draft: 1.20 m to 2.70 m
Weight: approx. 5.5 tons
Center board sword in central hull in front of the mast
Y- shaped foils

Sails & Rigging
Mast: aluminum, Height: 21m
Upwind sails: 150 m²
Sail downwind: 250 m².
Mainsail: Hydranet 2004, surface area 85 m2
Front sails: staysail and solent in Hydranet (2014)
Asymmetric spinnaker (2014), new, socked
Small gennaker, Large gennaker
Storm Jib

Safety
Approved in 1st category
Flairs in 1st category
Liferaft: 4 seats (rigid)
Bilge pump: 2 hand pumps
Extinguisher: 2 x 2kg
Main and masthead lights

Engine
Z-Drive engine, Volvo, 27 hp, diesel, accessible from cockpit
Engine serviced: piston rings, connecting rod bearings and overhaul of the engine in 2013.
Tank: 40 L (shelf under the companionway)

Electricity
3 batteries (3x110A), inside under the cockpit, in front of the motor
Electro panel at chart table

Electronics
NKE control unit (log, depth sounder, wind instrument)
Wind vane, VHF, AIS, GPS NLR
1 x NKE pilots
Radar
2 x anchors

Interior equipment: 1 stove (gimballed) ,1 x folding berth on port side easily accessible from the cockpit and 1 x double berth in center, 1 x folding chart table, shelves on port side, light floors
Goyot hatches, portholes on each side (very good visibility from inside), 1x emergency hatch
Floats, central beam with technical hatches (uninhabitable)

Boat is awarded with the label « Bateau d'intérêt patrimonial » (BIP): exemption of French annual navigation fee ,including Outremer tax
  • Length:
    15.24m (50 feet)
  • Beam:
    11.89m (39 feet)

echo sounder, GPS, radar, VHF radio

bilge pump

life raft

gennaker, spinnaker

€ 70,000

VAT not paid
+590 6XX-XXXX (show)
Supplier:

Band of Boats

  • Sint Maarten, Saint Martin

Contact form

Similar boats

Steel Sailboat 50
sailing yacht ≈ 15.24×4.30m
Steel Sailboat 50 (1991)
Denmark
kr. 1,550,000 VAT not paid
Lansart 47
Reduced
sloop ≈ 14.76×4.64m
Lansart 47 (2006)
France
€ 249,000 269,000 VAT paid
Custom built Caroff
sailing yacht ≈ 14.17×4.60m
Custom built Caroff (1981)
Spain
€ 79,200 VAT paid
Solent Arthur ROBB 54
ketch ≈ 16.28×3.96m
Solent Arthur ROBB 54 (1970)
Italy
€ 130,000 VAT paid
Rinaldi ARIA 142
sloop ≈ 14.20×4.53m
Rinaldi ARIA 142 (2003)
Italy
€ 100,000 VAT paid
Custom PLAN Caroff
sailing yacht ≈ 14.17×4.60m
Custom PLAN Caroff (1981)
Spain
€ 69,000 VAT paid
Professional Catamaran
sailing catamaran ≈ 15×8m
Professional Catamaran (2009)
Portugal
€ 550,000 VAT not paid
Ketch Galeasen Jutta
ketch ≈ 16.20×4.50m
Ketch Galeasen Jutta (1927)
Denmark
kr. 700,000 VAT not paid
Classic 50FT Steel Cutter
sailing yacht ≈ 15.24×3.66m
Classic 50FT Steel Cutter (1982)
Great Britain
£ 99,950 VAT paid
Classique YAWL Bermudien
yawl ≈ 15.05×3.79m
Classique YAWL Bermudien (1964)
France
€ 270,000 VAT paid
Verdicchio 56
sailing yacht ≈ 16.89×4.40m
Verdicchio 56 (2009)
France
€ 160,000 VAT paid
Werft Stizi Altair 46
Reduced
ketch ≈ 14×4m
Werft Stizi Altair 46 (1975)
Italy
€ 63,000 68,000 VAT paid