Corby 25 for sale on special offer

  • Great Britain, Southampton

  • sloop

  • 4 weeks ago

  • Visits: 102

Model: Corby 25 | Manufacturer: Corby | Category: used boat
In 2000 Corby built a custom 25 for Dublin based Mike Guinan in strip Cedar and before fitting out an arrangement was made for Harley Raceboats to take moulds off the hull and deck. Harley then built 3 boats before sending the moulds to Latvia.
Duff Lite is one of those three Harley built boats.
As with all Corby designs this is a great IRC boat with a great track record including the overall in the 2023 RORC De Guingand Bowl and the double handed overall in the 2021 RORC Castle Rock race.
Duff Lite has had many upgrades including new sails.
She is ready to win, contact me to view this boat in Hamble.

Spars and Rigging
Aluminium mast and boom
Double spreader mast
Keel stepped mast
Stainless steel standing rigging
New Cap shrouds 2018
New lower shrouds 2023
Aluminium spinnaker pole
Carbon spinnaker pole
Mainsheet on traveller with control lines
Hanked genoa

Deck Gear
Mainsheet on Harken traveller with control lines
Genoa tracks mounted on side deck
Cascade backstay system (control lines led to both sides)
2x Harken halyard winches on coachroof
2x Harken primary winches
8x Spinlock deck clutches on coachroof
Cam cleats on aft face of coach roof
Cam cleats for cross sheeting
Backstay flicker
2x mooring cleats aft
Tiller steered with stainless steel racquet tiller
Spinlock tiller extension

Interior
Interior with 2 x saloon berths
Under cockpit storage aft
Central bulkhead in GRP
Forward cabin with storage area and heads (Jabsco manual toilet)

Additional Equipment
4 wheeled braked road trailer (recently serviced, new wheels and tyres 2023)
2 x Compass mounted on coachroof
Lifting strops
2 x Winch handle pockets (removable)
2 x Cockpit rope bags (removable)
4 x Fenders
Jack stays
Horseshoe buoy with transom mount
Saloon cushions

Construction
GRP Hull and deck finished in white gelcoat
Non-skid finish applied to cockpit, side decks and coachroof
Deep keel with lead bulb - finished with Durepox (2022)
Spade rudder - finished with Durepox (2022)

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
It is not guaranteed that the safety gear listed on the specification comes within the manufacturer's safety guidelines i.e. expiry dates and servicing and is therefore sold as is.
  • Boat kind:
    Boat category:
    sloop
    Model:
    Corby 25
    Boat builder:
    Corby
  • Year built:
    2005
    Location:
    Great Britain, Southampton
    Category:
  • Length:
    7.62m (25 feet)
    Beam:
    2.49m (8.2 feet)
  • Draught:
    1.85m (6.1 feet)
  • Engine:
    1. Lombardi
  • Fuel:
    diesel

compass

fenders

spinnaker

£ 26,950

VAT paid
+44 14XX-XXXX (show)
Supplier:

Band of Boats

  • Great Britain, Southampton

Contact form

Similar boats

Bénéteau Escapade
sloop ≈ 8.10×2.77m
Bénéteau Escapade (1976)
France
€ 70,000 VAT paid
Sedna 26
sloop ≈ 7.92×2.74m
Sedna 26 (2017)
Great Britain
£ 34,950 VAT paid
Jeanneau Sun Odyssey 24.1
sloop ≈ 7.28×2.44m
Jeanneau Sun Odyssey 24.1 (1995)
Portugal
€ 17,000 VAT paid
Bénéteau First 260 Spirit
sloop ≈ 7.70×2.75m
Bénéteau First 260 Spirit (1996)
France
€ 23,500 VAT paid
Barquette Marseillaise
Reduced
sailing cabin boat ≈ 8×2.80m
Barquette Marseillaise (1950)
France
€ 28,000 35,000 VAT paid
Etap 26 I
sloop ≈ 7.85×2.78m
Etap 26 I (2003)
France
€ 27,800 VAT paid
Bénéteau First 27
sloop ≈ 7.99×2.54m
Bénéteau First 27 (2023)
France
€ 125,000 VAT paid
Puma 26
sloop ≈ 8×2.80m
Puma 26 (1975)
Spain
€ 9,500 VAT paid
Bénéteau First 25
Reduced
sloop ≈ 7.50×2.78m
Bénéteau First 25 (1980)
France
€ 6,000 9,900 VAT not paid
Gibert Gib'Sea 76
sloop ≈ 7.60×2.84m
Gibert Gib'Sea 76 (1987)
France
€ 12,900 VAT paid
EDEL 3
sloop ≈ 7.80×2.48m
EDEL 3 (1973)
France
€ 7,000 VAT paid
Maxus Yachts 24
New
sloop ≈ 7.20×2.55m
Maxus Yachts 24 (2010)
Sweden
kr 290,000 VAT paid